The Nerf Tactical Vest is designed to hold 4 x 6-dart clips, 12 x individual foam darts, 1 x pistol-sized blaster, 1 x N-Force foam melee weapon, along with a zippered mesh pouch which can hold additional items or blasters.
The package also comes with 2 x Clear Clips and 12 x Streamline foam darts.
The package also comes with 2 x Clear Clips and 12 x Streamline foam darts.
Its pistol holster has adjustable straps to cater to various Nerf blasters, it has been tested to fit Nerf Mavericks and Nite Finders (and similar sized and shaped blasters).
The back mounted scabbard can fit N-Force foam melee weapons like the Marauder or Warlock (and similar sized and shaped foam melee weapons too).
There is a velcro patch section at the upper left chest section of the vest. Users can attach their own velcro patches to customize their vests too.
The vest is worn like jacket and is secured by a vertical zip in the front center of the vest, there are 4 adjustable velcro straps (2 on either side of the vest) which can be adjusted to fit individual users.
The front dimensions of the vest are approx. 56 cm (22 inches) in height and 50 cm (20 inches) in width.
The girth of the vest can be adjusted anywhere from approx. 80 cm (31.5 inches) to 110 cm (43 inches) in circumference.
The vest material is 100% Polyester and is surface wash only. The back of the vest is made of a mesh material for better ventilation and comfort.
Review:
Nerf Tactical Vest Set - Box (Front)
Nerf Tactical Vest Set - Box (Back)
Nerf Tactical Vest Set - Contents (Vest Front)
Nerf Tactical Vest Set - Contents (Vest Back)
Nerf Tactical Vest Set - Equipped with Clips, Ammo & Blaster
(Additional clips, ammo and blaster sold seperately)
Nerf Tactical Vest Set - Velcro Patch Section
(Velcro patch shown is not included, for demonstration purposes only)
Nerf Tactical Vest Set - Equipment Demonstration
(Wearer Profile: 1.83m/6ft tall, 82kg/180lb, Waistline 34", Adult Male)
Nerf Tactical Vest Set - Clear Clips in Clear Series Blasters
Nerf Tactical Vest Set - Close-Up of Clear Clips
Nerf Tactical Vest Set at Amazon.com
Can the Break barrel fit in the pistol holster?
ReplyDeleteChris,
ReplyDeleteWell, although its possible to slot part of the Barrel Break into the holster, it isn't designed for that blaster as the holster's velcro strap is not positioned to secure the angled trigger handle on the Barrel Break.
The holster is designed more for pistol-shaped blasters like the Maverick or perhaps the upcoming Spectre.
The Barrel Break is able to fit, but the velcro holder doesn't wrap around. It is a bit bulky though.
ReplyDeleteFor the velcro patch part, is it the soft side or the sharper side that is on the vest.
ReplyDeleteSG NERF,
ReplyDeleteTo clarify: Is it the hooks or loops that are on the vest in the patch spot so that I can know which patches to get. Sorry about the lack of clarity in my last question.
John
John,
ReplyDeleteThe tactical vest's velcro section is the softer "loops" side. So you'll need to get patches with the velcro "hooks" side.
Does the recon pistol fit in the holster?
ReplyDeleteJohn,
ReplyDeleteThe Recon pistol main unit cannot fit into the holster.
I saw the question about the Barrel Break and immediately wondered if it was possible to slot that weapon ( or any other Nerf gun) into the back holster which is intended for the N-Force weapons.
ReplyDeleteThomas,
ReplyDeleteThe scabbard on the back of the tactical vest is only around 5 cm (2 inches) in diameter, it is mainly designed to fit the N-Force foam melée range.
Can the back holster fit the short sword from the Stonewall set?
ReplyDeleteJohn,
ReplyDeleteThe tactical vest's back scabbard should be able to fit the N-Force short sword too.
Can the holster be detached from the rest of the vest? I think i read somewhere that you'll be able to take it off and strap it to your leg or something. I'm probably wrong. it'd be much simpler to draw a sidearm from the thigh than from the left side of the stomach. plus with something as large as a Maverick (not that i use those much; i prefer nitefinders) it could be somewhat bulky to move around with.
ReplyDeleteMorgan,
ReplyDeleteThe side pistol holster is permanently sewn to the vest, so its not removable.
Anyways, i guess holster positioning is up to individual user preference. :)
SG Nerf,
ReplyDeleteWhat are the dimensions of the velcro patch spot (height and width, please)?
John
I was reading some stuff about the upcoming Barricade Rev-10 and I wondered whether it'd fit in the holster of the tactical vest... it's probably too early to tell. Please let me know when you can. (I'll probably just end up making my own vest and holster(s)).
ReplyDeleteJohn,
ReplyDeleteThe vest's top left chest velcro area is around 10cm x 10cm in dimensions.
can we use your pictures in are blog
ReplyDeletewww.wrnerfteam.bogspot
nerf team,
ReplyDeleteIf you want to use my site's photos for reference, please keep my original site link watermarks intact in the photos and credit a link back to my site in the posts that you use them in.
Oh man this is awesome. Is this a one size fits all deal or what?
ReplyDeleteKeegan McCormick,
ReplyDeleteWell, the box states "One Size Fits Most". :)
Check the vest measurements that i posted up in the review, it'll give you an idea of the sizing and adjustment features.
do the 18 dart clips fit? or are they to long?
ReplyDeletewhat kind of accsesories/things could fit in the pouch?
which blasters fit in the holster?
nathanael,
ReplyDeleteIts possible to fit 18-dart clips in the vest's clip loops, but the extra length of the clips tends to get in the way of the other sections of the vest and kinda makes the overall design look abit odd. :)
The side mesh pouch can fit a small blaster like a Nerf Reflex or Eliminator, it can also fit 1 or 2 more 6-dart clips too.
The holster is designed to fit pistol-sized Nerf blasters, i've successfully test fitted Mavericks, Nite Finders, Storm Fires, Spectres etc. Basically, any Nerf blaster that has similiar shapes as those models.
SG Nerf,
ReplyDeleteCan the Lanard Scatter Blast fit in the mesh pocket?
John
John,
ReplyDeleteNope, the Lanard Scatter Blast is too large to fit into the vest's mesh pocket.
how much is the jacket set
ReplyDeleteNorsuhailah Sariman,
ReplyDeleteThe Nerf Tactical Vest set retails at SGD$49.90 and its available at most major dept stores in Singapore.
I read ur earlier comments,can u tell me the diff between nerd reflex and eliminator?
ReplyDeleteIrsyad,
ReplyDeleteThe Nerf Eliminator and Reflex are both very compact spring plunger powered blasters with similiar components.
The main difference between the 2 models is the exterior casing design.
SG nerf, can the Marauder Longsword fit well into the scabbard on the back of the vest?
ReplyDeleteDavid,
ReplyDeleteYes, the N-Force Marauder can fit into the back scabbard of the Nerf Tactical Vest.
Hey, btw. Where did you make that badge? My friend is interested in making one too
ReplyDeleteGabriel Ho,
ReplyDeleteCheck with the badge makers at the NerfSG forum.
So, you mean that this vest can be used in place of the Dart Tag Vests? Since it's loop velcro?
ReplyDeleteMusta,
ReplyDeleteRead the review again, the velcro on the Nerf tactical vest is only on a small section at the top left chest area.
I have no idea how you can assume that it can be used in place of a Dart Tag vest.
Well...
ReplyDeleteGuess I'll just have to play "Shoulder-Score Dart Tag" !!! XD
which forum can i find the badge makers?
ReplyDeleteAdil,
ReplyDeleteCheck this thread at the NerfSG forum:
http://nerfsg.freeforums.org/nerfsg-patch-batch-2-closes-30th-oct-t1648.html
so this is worth buying? I currently use my cross-draw vest I play airsoft in, works good, but this might be better since it's specific to fit nerf stuff.
ReplyDeleteChris,
ReplyDeleteI guess its best for you to just test it out to see if it fits your preference (and style).
do they sell vest malaysia? if yes, how much
ReplyDeleteAdil,
ReplyDeleteI've no idea about the Nerf stock availability in Malaysia, best if you just check with the dept stores around your area.
could u tell me wot sg is
ReplyDeleteI thort it wos another brand of dart gun but then I saw it on the tactical vest
Samza,
ReplyDelete"SG" is short form for Singapore (the country where i live).
Does it fit a nerf barricade?
ReplyDeleteHey just asking i'm planning to get one this Christmas but can it hold the Nerf Barricade.
ReplyDeleteI also have a Nerf Maverick but is it possible to stuff it inside the small side pocket on the vest?
Thanks for the awesome reviews!
Nathan,
ReplyDeleteThe Nerf Barricade seems to be abit too wide to fit into the Vest's holster.
Roy Xiao,
ReplyDeleteThe Barricade is abit too wide to fit into the holster, it is more suitable for the Maverick.
If you are referring to the small zippered side mech pocket, thats too small for the Maverick.
Thanks for replying to my question but I have two questions.
ReplyDeleteIs it possible to hold a Nerf Hornet in the pistol holster, cause my bro's getting it for his b.day and it would be a shame not to be able to hold it as a side arm.
Next, Can i like, stretch the pistol holster to make it able to fit the Barricade, cause its like the best sidearm I've ever seen.
Sorry for so many questions! :D
Roy Xiao,
ReplyDeleteNope, the Nerf Hornet is an even larger blaster and would definitely not be able to fit into the Vest holster (or even any conventional holster).
Well, you can try stretching the holster to fit your Nerf Barricade, but that blaster is basically too wide to fit properly.
Ah well, that's a total shame. Anyway, thanks a lot! :D
ReplyDeleteDo the clips have to be upside down on the vest? if your running the bullets will just fall out.
ReplyDeleteDreamCrusher,
ReplyDeleteI guess the reason why the clips are shown on the Nerf box description positioned upside down in the vest, is because in that clip position the foam darts wouldn't get pulled by the elastic straps when the clips are removed in a downwards motion.
If the clips are working properly, the foam darts wouldn't pop out so easily.
You can also slot the clips right side up in the vest too, just try either method and see which works better for you.
Can the barricade fit into the pistol holster?
ReplyDeleteStoll,
ReplyDeleteBy default, the Nerf Barricade is too large to fit into the Vest's holster.
with some modding a.k.a duct tape or something could a gun fit on the back
ReplyDeleteIs a longshot or Longstrike fitable in the place for axe or sword?
ReplyDeleteRichard,
ReplyDeleteThe back mounted scabbard cannot fit a Longshot or Longstrike.
In nerf games, is this considered *bulletproof*?
ReplyDelete12 dan 12,
ReplyDeleteWell, it's up to Nerf game organizers to create their own rules regarding the wearing of vests. :)
Does the nerf vortex pocket howler fit in the pockets? (I use it as a grenade in wars.)
ReplyDeleteD.E.C,
ReplyDeleteNot too sure about that... 'cos i don't have a vortex pocket howler to test fit it.
I guess you could check the scale of the clips and darts to compare them with the dimensions of your vortex pocket howlers. :)
best ever
ReplyDeleteCan you fit an N-Strike Elite Stryfe on the N-Strike Tactical Vest?
ReplyDelete